Benchtop Rotors
Perkin Elmer US LLC Replacement Rotor for 1/16 10-Port Valve, Temperature T
The T type rotor material is designed for use in high-temperature applications, requiring the valve to be at or above 300°C. In order to seal properly and turn easily, after installation, the rotor should be temperature conditioned by brining the valve assembly to 325°C and cycling the valve (on-off) 10 times. The temperature of the valve then can be set according to the requirements of the user.
USA Scientific Inc Minicentrifuge rotor PCR tube
Minicentrifuge rotor for PCR tubes , 32 x 0,2ml PCR tubes or 4x8 PCR tube strips
TA Instruments HA Aluminum, Conical DIN Rotor, Radius 14 mm, Rotor Height 42 mm, HR X0, Smart Swap 2
Waters TA Instruments HR X0, Smart Swap 2, HA Aluminum, Conical DIN Rotor has a radius of 14 mm and a rotor height of 42 mm.
TA Instruments Stainless Steel, Wide Gap Vaned Rotor with Heat Break, Rotor Radius 7.5 mm, Rotor Height 38 mm, Number of Vanes 4, for Use with Standard 15 mm Radius Cup, HR X0, Smart Swap 2
Waters TA Instruments HR X0, Smart Swap 2, Stainless Steel, Wide Gap Vaned Rotor With Heat Break has a rotor radius of 7.5 mm, rotor height of 38 mm, and 4 vanes. The rotor is designed for use with the standard 15 mm radius cup.
Beckman Coulter JLA-16.250 Fixed-Angle Aluminum Rotor, Biosafety Lid - 6 x 250 mL, 16,000 rpm, 38,400 x g
JLA-16.250 Fixed-Angle Rotor with Biosafety Lid, Aluminum. Major applications: General purpose, large-volume and multitube processing. Lightweight alternative to conventional 250 rotors; empty rotor weight is 10.3 kg (22.7 lb). For use in Avanti J Series and J2 Series centrifuges. The maximum speed is 14,000 rpm in J2 Series centrifuges.
TA Instruments Stainless Steel, Vaned Rotor, Radius 14 mm, Rotor Height 42 mm, HR X0, Smart Swap
Waters TA Instruments HR X0, Smart Swap 2, Stainless Steel, Vaned Rotor has a radius of 14 mm and rotor height of 42 mm.
TA Instruments Hermetic Lids with Pinhole, Laser Cut Vent Hole, 75 Micron Diameter, Vapor Pressure Studies, Temperature Range -180°C to 600°C, Improve Resolution of Volatile Species, 50 Pack
Waters TA Instruments Hermetic Lids with Pinhole are special hermetic sample pan lids with a laser-cut vent hole (75 micron diameter) used for vapor pressure studies. Temperature range is -180°C to 600°C. These lids improve resolution for volatile species analysis.
TA Instruments HA Aluminum, Recessed End Rotor, Radius 14 mm, Rotor Height 42 mm, HR X0, Smart Swap 2
Waters TA Instruments HR X0, Smart Swap 2, HA Aluminum, Recessed End Rotor has a radius of 14 mm and a rotor height of 42 mm.
TA Instruments High Volume Sample Pan Kit, 100 High Volume DSC Pans 100µL, Lids and O Ring Seals, Die Set for DSC Sample Press, Stainless Steel Needlepoint Tweezers, Instructions Included, Aqueous Based Pharmaceutical and Biological Materials
Waters TA Instruments High Volume Sample Pan Kit contains 100 high-volume DSC pans (100 µL), lids, and o-ring seals, die set for DSC sample press, stainless steel needlepoint tweezers, and instructions. Ideal for aqueous-based pharmaceutical or biological materials.
TA Instruments Stainless Steel, Conical Rotor, Radius 7.5 mm, Rotor Height 42 mm, for Crumb-Rubber Modified Asphalt, HR X0
Waters TA Instruments HR X0, Stainless Steel, Conical Rotor has a radius of 7.5 mm and rotor height of 42 mm. It is appropriate for measurements of crumb-rubber modified asphalt.